Compact open-source Lattice ECP5 board commonly used with LiteX, USB and open-source ECP5 flows.
LFE5U-25F/85Fopen toolchainprice unknownrisc-vlinuxusbeducation
Enter board slugs separated by commas, for example: sipeed/tang-nano-20k,icebreaker/icebreaker.
Compact open-source Lattice ECP5 board commonly used with LiteX, USB and open-source ECP5 flows.
Compact Gowin GW2AR board with HDMI, audio amplifier, TF card slot, SDRAM, and onboard debugger.
| Field | OrangeCrab | Tang Nano 20K |
|---|---|---|
| Chip | LFE5U-25F/85F | GW2AR-LV18QN88C8/I7 |
| Family | ECP5 | GW2A/GW2AR |
| Device type | FPGA | FPGA |
| Price | unknown | 28.17 USD |
| Toolchains | Yosys + nextpnr + Project Trellis | Gowin EDA, Yosys + nextpnr-gowin + Apicula |
| Open toolchain | yes | yes |
| Interfaces | USB, MicroSD | HDMI, MAX98357A I2S amplifier path, TF card slot, USB Type-C, Onboard BL616 JTAG, USB UART |
| Memory | DDR3 requires revision check | 32-bit SDR SDRAM 64 Mbit, Onboard flash 64 Mbit |
| Documentation | 65 | 78 |
| Difficulty | intermediate | beginner |
| Openness score | 92 | 76 |
| Where to get help | OrangeCrab GitHub organization | Sipeed forum, r/GowinFPGA |
| Typical risks | Feature set differs across OrangeCrab revisions; verify exact revision. | Verify exact board revision before using pin labels, constraints, or power assumptions. Onboard debugger recognition Flash persistence mode |
| Better for | open-source flow | beginner learning |