Small Gowin GW1NR board for low-cost learning, HDMI experiments, softcore demos, and open-source Gowin flow exploration.
GW1NR-LV9QN88PC6/I5open toolchain14.5 USDeducationvideorisc-vretro
Enter board slugs separated by commas, for example: sipeed/tang-nano-20k,icebreaker/icebreaker.
Small Gowin GW1NR board for low-cost learning, HDMI experiments, softcore demos, and open-source Gowin flow exploration.
Gowin GW2A-18 dock-style board intended for secondary development with more connectors than Tang Nano boards.
| Field | Tang Nano 9K | Tang Primer 20K Dock |
|---|---|---|
| Chip | GW1NR-LV9QN88PC6/I5 | GW2A-LV18PG256C8/I7 |
| Family | GW1NR / LittleBee | GW2A |
| Device type | FPGA | FPGA |
| Price | 14.5 USD | unknown |
| Toolchains | Gowin EDA, Yosys + nextpnr-gowin + Apicula | Gowin EDA, Yosys + nextpnr-gowin + Apicula |
| Open toolchain | yes | yes |
| Interfaces | HDMI, USB Type-C, Onboard JTAG, USB UART | Ethernet, HDMI, USB 2.0, SD card, JTAG/UART connector |
| Memory | PSRAM 64 Mbit, Onboard flash 32 Mbit | DDR3 1 Gbit, NOR flash 64 Mbit |
| Documentation | 70 | 68 |
| Difficulty | beginner | intermediate |
| Openness score | 72 | 70 |
| Where to get help | r/GowinFPGA | Sipeed forum |
| Typical risks | Pinout and constraints must be taken from the exact board revision files, not inferred from this catalog entry. Open-source flow is feature-dependent | Dock-specific features must be checked against the dock revision documentation. |
| Better for | beginner learning | open-source flow |