toolchain_guidebeginnerconfidence 4/5CC BY 4.0

What Gowin EDA is

Gowin EDA is the vendor flow for Gowin FPGA families used by Tang and Gowin starter boards.

For Tang boards, start with the Sipeed tutorial for the exact board and device. If using open-source Gowin tools, verify the specific chip, board programmer and primitives through Apicula/nextpnr documentation.

Graph links

Boards: sipeed/tang-nano-20k, sipeed/tang-primer-20k-dock, gowin/gw1nr-9-starter-kit

Chips: none

Toolchains: gowin-eda, yosys-nextpnr-apicula

Protocols: none

Pitfalls: Board tutorials may assume a specific IDE version and device selection string.

Related boards

SipeedGW2A/GW2ARbeginnerconfidence 4/5

Tang Nano 20K

Compact Gowin GW2AR board with HDMI, audio amplifier, TF card slot, SDRAM, and onboard debugger.

GW2AR-LV18QN88C8/I7open toolchain28.17 USDeducationvideoaudiorisc-v

SipeedGW2Aintermediateconfidence 3/5

Tang Primer 20K Dock

Gowin GW2A-18 dock-style board intended for secondary development with more connectors than Tang Nano boards.

GW2A-LV18PG256C8/I7open toolchainprice unknowneducationvideonetworkingrisc-v

Gowin SemiconductorGW1NR / LittleBeeintermediateconfidence 2/5

GW1NR-9 Starter Kit

Official Gowin starter kit for GW1NR-9 evaluation and Gowin EDA bring-up.

GW1NR-LV9LQ144PC6/I5open toolchainprice unknowneducationcontrol

Sources

https://www.gowinsemi.com/en/support/home/https://wiki.sipeed.com/hardware/en/tang/tang-nano-20k/example/led.html

Suggest correction