Compare boards
Up to four boards side by side: chip, logic, toolchains, interfaces and price.
| Attribute | Tang Mega 60K Dock | GW2A-18 Video Development Kit (PG484) | GW2A-55 Starter Kit (PG484) |
|---|---|---|---|
| FPGA | GW5AT-LV60PG484AC1/I0 | GW2A-LV18PG484C8I7 | GW2A-LV55PG484C8I7 |
| Family | GW5A | GW2A | GW2A |
| Logic (LUTs) | 59904 | not listed | not listed |
| Price | at the seller | at the seller | at the seller |
| Open toolchain | no | Project Apicula | Project Apicula |
| Toolchains | Gowin EDA, LiteX (litex-boards sipeed_tang_mega_60k), openFPGALoader (GW5AT-60) | Gowin EDA, Project Apicula | Gowin EDA, Project Apicula |
| Interfaces | PCIe 2.0 card-edge (x1 mode only at present), USB 3.0 (CH569, 5 Gbps), Gigabit Ethernet, HDMI/DVI (TX and RX), SD slot (1-bit SDIO/MMC or SPI), USB JTAG, USB UART, Differential ADC channels | HDMI_IN, HDMI_OUT, MIPI_CSI, MIPI_DSI | Ethernet, MIPI_CSI, MIPI_DSI |
| Memory | DDR3 4 Gbit (512 MB), Onboard flash 64 Mbit | not listed | not listed |
| Level | Professional | Intermediate | Intermediate |
| Where to get help | Sipeed forum, r/GowinFPGA | official docs | official docs |
| Known issues | PCIe works in x1 mode only; Minimum Gowin IDE version; 3.3 V I/O limit | — | — |