Digilent Artix-7 board with Vivado WebPACK support, Pmods, Arduino/chipKIT style expansion, DDR3 and Ethernet.
XC7A35TICSG324-1Lprice unknowneducationrisc-vcontroldsp
Enter board slugs separated by commas, for example: sipeed/tang-nano-20k,icebreaker/icebreaker.
Digilent Artix-7 board with Vivado WebPACK support, Pmods, Arduino/chipKIT style expansion, DDR3 and Ethernet.
Small Gowin GW1NR board for low-cost learning, HDMI experiments, softcore demos, and open-source Gowin flow exploration.
| Field | Arty A7 | Tang Nano 9K |
|---|---|---|
| Chip | XC7A35TICSG324-1L | GW1NR-LV9QN88PC6/I5 |
| Family | Artix-7 | GW1NR / LittleBee |
| Device type | FPGA | FPGA |
| Price | unknown | 14.5 USD |
| Toolchains | Vivado WebPACK / ML Standard | Gowin EDA, Yosys + nextpnr-gowin + Apicula |
| Open toolchain | no | yes |
| Interfaces | Ethernet, USB UART, USB-JTAG | HDMI, USB Type-C, Onboard JTAG, USB UART |
| Memory | DDR3 variant-specific; verify in Digilent memory tab | PSRAM 64 Mbit, Onboard flash 32 Mbit |
| Documentation | 86 | 70 |
| Difficulty | beginner | beginner |
| Openness score | 20 | 72 |
| Where to get help | Digilent Forum | r/GowinFPGA |
| Typical risks | Variant-specific records should be split before publishing exact resources. 35T and 100T variants differ | Pinout and constraints must be taken from the exact board revision files, not inferred from this catalog entry. Open-source flow is feature-dependent |
| Better for | beginner learning | beginner learning |