Sign in
protocol_notebeginnerconfidence 4/5CC BY 4.0

Pmod connectors

Pmod is a small expansion connector ecosystem; verify voltage, pin mapping and peripheral protocol before attaching modules.

Use Pmods as controlled bring-up targets. Before wiring, check board bank voltage, Pmod module voltage, connector orientation and constraints. For SPI/I2C Pmods, simulate the controller before using hardware.

Graph links

Boards: digilent/arty-a7, digilent/basys-3, icebreaker/icebreaker
Chips: none
Toolchains: none
Protocols: spi, i2c, uart, gpio
Pitfalls: Pmod-compatible physical connector does not prove voltage compatibility.

Related boards

iCEBreaker FPGAiCE40 UltraPlusbeginnerconfidence 4/5
iCEBreaker

Open-source educational Lattice iCE40UP5K board designed around the Yosys, nextpnr and IceStorm flow.

iCE40UP5K-SG48open toolchainprice unknowneducationcontroldspformal
DigilentArtix-7beginnerconfidence 4/5
Arty A7

Digilent Artix-7 board with Vivado WebPACK support, Pmods, Arduino/chipKIT style expansion, DDR3 and Ethernet.

XC7A35TICSG324-1Lprice unknowneducationrisc-vcontroldsp
DigilentArtix-7beginnerconfidence 3/5
Basys 3

Entry-level Digilent Artix-7 trainer board for introductory digital design courses.

XC7A35T-1CPG236Cprice unknowneducationcontrol

Sources

https://digilent.com/reference/pmod/starthttps://digilent.com/reference/programmable-logic/arty-a7/start
Suggest correction